DS-0061 Pro Stop and Go Box

PRO STOP & GO BOX - For 2 lanes, multiple boxes can be used for multi lane tracks Must be used in conjunction with DS200 PRO or DS300 PRO.
The simple and effective way to connect your lap counter, hand throttles & power supplies to your track. The Pro Stop & Go box will work in conjunction with the DS200 or DS300 to turn track power off and on when starting or finishing a race. Large red and green LED traffic lights signal the start of the race.

Using DS light bridges with a PC-based timing and scoring system:

DS light bridges are durable and reliable sensor devices. Theoretically, they can be used with any kind of timing and scoring system provided you have the means of connecting them properly. They come with an industry-standard plug and are pre-wired to route all the input to the right place in a DS lap counter/timer unit. Provided that you have the means to determine which pin carries what on the DS light bridge's plug and can connect it to your PC-based system properly, it should work fine, as it functions the same as a sensor assembly you might build up from individual components. Always check to see if voltage in the system you are using is in the correct range for any DS components you are using. They will usually work fine on 10 to 14 volts. Be careful, however, as a wrong connection can damage the light bridge, and neither Electric Dreams nor DS can guarantee the reliability of any DS item used with with any other system.